AC Infinity Cloudforge T3 V2 4.5L Humidifier

Quick Answer

AC Infinity Cloudforge T3 V2 4.5L Humidifier is an ultrasonic plant humidifier designed for controlled humidity delivery in indoor grow tents and plant rooms. Model AC-CFT3 combines a 4.5 L tank, 10 output levels, onboard humidity and VPD trigger programs, a corded sensor probe and a flexible delivery hose. Maximum rated output is 240 mL/h and maximum runtime is up to 45 hours, depending on the selected level and operating conditions. A compatible UIS controller can add app-based and expanded programming, but the controller is sold separately.

Product Description

The AC Infinity Cloudforge T3 V2 gives indoor growers direct control over ultrasonic vapour output without requiring an external controller for basic operation. The onboard display supports manual output, humidity-triggered operation, VPD-triggered operation, timer and cycle programs. The included probe measures conditions near the target grow area, while the directional cap or adjustable hose lets you route vapour where it is needed.

The compact black unit uses a transparent reservoir, sealed water-resistant housing and an automatic empty-tank shut-off. Its backlit display can be hidden during operation, and backup memory supports automatic restart after an interruption. For app control and broader UIS climate coordination, connect the humidifier to a compatible AC Infinity UIS controller using the included UIS M-M extension cord; the separate controller overrides onboard programming while connected.

Key Features

• Onboard climate programming: Manual ON, humidity-triggered AUTO, VPD-triggered operation, timer and cycle modes.
• Ten output levels: Adjustable ultrasonic vapour output for controlled delivery.
• 4.5 L reservoir: Rated for up to 45 hours per fill; the maximum output rate is 240 mL/h. Runtime varies with the selected output level and operating conditions.
• Flexible delivery: Use the directional cap or the included corrugated hose, adjustable from approximately 73 to 210 cm.
• Remote sensing: Included corded temperature and humidity probe for placement near the grow area.
• Operational safeguards: Automatic shut-off when the reservoir is empty, hidden-display option and backup memory.
• UIS compatible: Connects to compatible AC Infinity UIS controllers for app access and expanded programming; controller sold separately.

Available Size and Variant

This Shopify listing contains one black 4.5 L Cloudforge T3 V2 variant. Selectable sizes or colours are not offered on this product page.

Specifications

Brand	AC Infinity
Product	Cloudforge T3 V2 plant humidifier
Model	AC-CFT3
Reservoir capacity	4.5 L
Vapour system	EC ultrasonic vaporizer
Output levels	10
Maximum output rate	240 mL/h
Maximum runtime	Up to 45 hours
Dimensions	17.2 × 17.2 × 35.7 cm
Flexible hose length	Approximately 73–210 cm
Rated power	24 W
Rated current	0.5 A
Input	100–240 V AC, 50/60 Hz
Noise level	38 dBA
Operating temperature	5–50°C
Operating humidity	30–85% RH
Controller compatibility	AC Infinity UIS ecosystem; compatible controller sold separately

Package Contents

• 1 × AC Infinity Cloudforge T3 V2 4.5 L humidifier
• 1 × flexible hose
• 1 × directional cap
• 1 × corded sensor probe
• 1 × probe mount
• 1 × nebulizer cleaning brush
• 1 × hook-and-loop cable tie
• 1 × UIS M-M extension cord
• Australian power connection supplied with this TG Hydroponics listing

Directions for Use

1. Place the humidifier upright on a dry, stable surface and disconnect power before filling.
2. Fill the reservoir with distilled water. Do not pour water into the open central pipe.
3. Fit the directional cap, or attach the flexible hose to the top outlet. Route the hose continuously upward and avoid low points or U-shaped bends where condensation can collect.
4. Connect the sensor probe to the humidifier and position the probe near the area whose conditions you want to monitor.
5. Connect power, then choose the required onboard mode and one of the 10 output levels. Follow the AC Infinity manual when setting humidity or VPD triggers.
6. For optional UIS control, connect the included UIS M-M extension cord to a compatible AC Infinity controller. The controller is sold separately and takes over programming while connected.

Care, Cleaning and Safety

• Use distilled water to reduce mineral deposits and residue.
• Replace the reservoir water at least every four days.
• Unplug the unit and clean the reservoir, base, stop valve and T3 filter at least weekly.
• For the base, use two cups of distilled water mixed with one tablespoon of vinegar, allow it to sit for five minutes, clean the nebulizer and stop valve with the included brush, then empty and wipe dry.
• Soak the T3 filter in the same distilled-water and vinegar mixture for five minutes, then rinse and reinstall after cleaning.
• Drain and dry the flexible hose after use. Keep the unit upright and do not move or service it while connected to power.
• Do not block openings, modify the unit or operate it in flammable, explosive or heavily chemical-laden atmospheres.

Frequently Asked Questions

What is the AC Infinity Cloudforge T3 V2 used for?

It is a 4.5 L ultrasonic humidifier for managing moisture delivery in indoor grow tents and plant-growing spaces.

Can the Cloudforge T3 V2 operate without a UIS controller?

Yes. The humidifier has onboard manual, humidity-triggered, VPD-triggered, timer and cycle programs.

Does the humidifier include Wi-Fi or app control by itself?

No standalone app connection is required for onboard operation. App access and expanded UIS programming require a compatible AC Infinity UIS controller, sold separately.

How large is the water tank?

The reservoir holds 4.5 L of water.

How long can one fill run?

AC Infinity rates the maximum runtime at up to 45 hours. Actual runtime varies with the selected output level and environmental conditions.

What water should I use?

Use distilled water, and never pour water into the open central pipe.

How long is the flexible hose?

The included hose adjusts from approximately 73 to 210 cm. Install it with a continuous upward route and no low U-shaped bend.

Does it stop when the tank is empty?

Yes. The Cloudforge T3 V2 includes automatic shut-off when the reservoir runs out of water.

How often should the unit be cleaned?

Change reservoir water at least every four days and clean the humidifier, stop valve and filter at least weekly.

What is included with this Shopify offer?

The offer includes the 4.5 L humidifier, flexible hose, directional cap, sensor probe and mount, cleaning brush, cable tie, UIS extension cord and the Australian power connection stated by TG Hydroponics.